HealthCraft Invisia 2-in-1 Towel Bar With Integrated Grab Bar
HealthCraft Invisia 2-in-1 Towel Bar With Integrated Grab Bar

HealthCraft Invisia 2-in-1 Towel Bar With Integrated Grab Bar

Brand/Manufacturer: HEALTHCRAFT PRODUCTS INC.
Save
Authorized Retailer Badge

HealthCraft Invisia 2-in-1 Towel Bar With Integrated Grab Bar adds a modern and elegant touch to any bathroom. The unique design disguises the grab bar feature as a luxurious bathroom accessory for hanging the towels. The Towel Bar offers convenience, supporting up to 500lbs (227kgs), without sacrificing the look or feel of the space. With color options that include polished chrome, stainless steel, and bronze, it is easy to find the perfect Towel Bar to compliment any bathroom.

Invisia Towel Bar highlights:

  • Elegant Design
  • Seamless look and feel
  • Multi-contact wall support
  • Solid construction and mounting
  • Luxurious bathroom accessory

Item #DescPkgPrice 
INV-TB16-CP 16"W, Polished Chrome Each $249.99 $189.05
INV-TB24-CP 24"W, Polished Chrome Each $249.99 $189.05
INV-TB16-BS 16"W, Brushed Stainless Each $289.99 $217.55
INV-TB24-BS 24"W, Brushed Stainless Each $289.99 $217.55
INV-TB16-ORB 16"W, Oil Rubbed Bronze Each $315.99 $236.55
INV-TB24-ORB 24"W, Oil Rubbed Bronze Each $315.99 $236.55

HealthCraft Invisia Towel Bar Features

  • Top curved bar supports up to 500lbs + bottom rung holds towel
  • 3-point wall connection provides maximum structural support 
  • Exceeds ADA 4.26.3 structural strength requirements for grab bars and fasteners 250lbs
  • Discreet wall stems with concealed screws makes mounting areas virtually invisible
  • Supports up to 500lbs (227kgs) when installed to structural wood backing
  • Disguised safety within a bathroom accessory
  • Made from durable, rust, resistant stainless steel
  • Elegant design with integrated support
  • Suitable for use in a wet environment
  • Solid construction and mounting
  • Available in 16" and 24" widths
  • Instruction Manual

Installation Instructions Of Towel Bar

  • Back off set screws from rail sockets.
  • Allow wall stems to freely move in and out of rail sockets
  • Peel off label on back of wall stems to expose sticker
  • With wall stems inside rail sockets, push the rail against the wall. Ensure level
  • Firmly press the rail so stickers on back of wall stems contact wall
  • Remove rail carefully so wall stems stay on the wall
  • Using wall stems as locating guides, mark the tile with center punch
  • Drill pilot holes for fasteners
  • Fasten the wall stems to the wall using appropriate fasteners and waterproofing
  • Place rail back onto the fastened wall stems
  • Secure rail to wall stems by tightening set screws. Inspect hardware regularly, and tighten if required.

How it Installs:

  • The 16”/41cm has a total length of 20.5"/52.3cm, but installs on 16”/41cm stud spacing.
  • The 24”/61cm has a total length of 29”/74cm, but installs on 24”/61cm stud spacing.

Installation Warnings:

  • Rail must be installed to walls that are structurally sound.
  • If desired installation location does not have adequate structure, add wood blocking.
  • Do not install if there is no structure for center point.
  • Do not install if there is no structure for side points.
  • Do not install if there is no structure for outer point.
  • Do not install if there is no structure behind walls.
  • Do not install if structure behind walls is unknown.
  • Do not install into metal studs.
  • Do not install in fiberglass / acrylic shower enclosures with insufficient stiffness and strength.
  • Rail and bathtub are slippery when wet.

Suggested Towel Bar Locations:

  • To determine the optimal mounting location, it is recommended to hold the rail in place and walking through the motions of a transfer (sitting, standing, reaching,etc.)
  • Recommended rail height 36-48" / 914-1219mm

Specification

Particulars

Specifications

MaterialStainless steel
Weight Capacity500lbs / 227kgs (ADA Compliant)
Rail Diameter1.25" / 31.8mm (ADA Compliant)
Wall Clearance1.50" / 38.1mm (ADA Compliant)
Rail WidthTowel Bar 16: 20.5" / 521mm
Towel Bar 24: 29" / 737mm
Rail Height4.625"/117mm
Installation MechanismMust screw to wood backing behind wall. TB16 aligns with 16" / 406mm stud spacing. TB24 aligns with 24" / 610mm stud spacing.
Installation Hardware/Fasteners10 x 3" / 76mm length, stainless steel wood screw (x3).
Fasteners Exposed or ConcealedConcealed; Rail stems conceal mounting hardware.
Commercial UseYes
Residential UseYes
Water ResistantYes
Rust ResistantYes

Warranty

Limited lifetime warranty

Products are covered by a limited lifetime warranty against defects in materials and workmanship for the original purchaser. Warranty excludes products that have been damaged through misuse, accidental damage, alteration, normal wear and tear, wood material and stain, or the use of corrosive or abrasive cleaning products.

Customer Reviews

Questions & Answers


 
 
Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
SubmitCancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.shopwheelchair.com

Close
}